Our replacement L/H switch to suit all 604, 644 and 404 models from 2001 on.  We use an original fitment connector so it will just plug straight in.

Please note, on certain models the 'flash' trigger button does not work as it was not used on the model from new. 


This switch is suitable for the following Rotax models:

  • R30
  • RS
  • Supermoto
  • Trail

As the original CCM DS Switch is no longer available, we have sourced this later version produced by the same switch manufacturer.  It has the same body, but slightly updated buttons.

It is wired ready for your CCM with 1 matching block connector. 

This non genuine replacement Ignition Switch is identical to look at and fit except that there is no parking light position when the steering is locked.  Your position (side) lights will still work just the same in the "on" or "run" position.  Just plug into the loom with the block connector attached.

Replacement indicator relay for use on all models.  Please note that this item needs to be connected in the following way:

  • Red wire - connect to X
  • Orange wire - connect to L
  • Black wire - does not connect to anything (isolate and move out of the way)
Instructions are printed on the side of the relay.

Japanese manufactured item that fits all models.  Sealed around contacts for better resistance against moisture. It is also used for the R30 headlight relay. 
Replacement front stop light switch for use on all models.

Replacement hydraulic rear stop light switch to suit all models.