404 Swing Arm Components

NON GENUINE CHAIN SLIPPER 404 ALL / 644-'04 ON

Chain Slipper (flat type), 404 & late 644

Chain slipper for all 404 models and some later built 644 models. Please check yours before ordering.

Bearing, swingarm (Long) 644 up to 2004 / 404 up to 2005 and all 604 models NON GENUINE PART

Replacement longer needle roller bearing to help reduce wear. When fitting this item, you can only use 2x o-rings on one side and 1x o-ring on the other. If this isn't possible then one either side will be fine. It will not fit 644 from '04 on, or the 404 from 2005 on.

Bearing, Swingarm NON GENUINE

Replacement standard size bearing to suit all models.

Bracket, Mudguard (404)

Bush, (404) - SWING ARM NO LONGER AVAILABLE FROM CCM

click to enlage Bush, (404) - SWING ARM NO LONGER AVAILABLE FROM CCM image 2

Replacement CCM swingarm journel to suit all 404 models.

C Spanner (WP rear shock)

C spanner for use in adjusting the WP rear shock absorber.

CHAIN ADJ. BLOCK THREADED - THIS PART MUST BE FITTED USING LOCTITE. (NON GENUINE)

Chain Roller, 404

Aftermarket chain roller to suit the 404 models. Generally we will supply a black item but if out of stock, we will substitute this item for a blue one.

JOURNAL,SWINGARM 404 HAINES (2 REQD) SEE "MORE"

Non Genuine CCM.

Heavy Duty Hardened Swing Arm Bearing Journals to fit 404DS and 404E. Manufactured for a more precise fit locally for us by a Precision Engineering Company.

Nut, Swingarm spindle (404)

Replacement swingarm spindle nut for the 404 models.

O-Ring, Swing Arm NON GENUINE

R35 SWING ARM-WILL FIT 404 IF USED WITH 17"WHEEL ONLY

click to enlage R35 SWING ARM-WILL FIT 404 IF USED WITH 17"WHEEL ONLY image 2

Rubber, Splash Guard (404) NO LONGER AVAILABLE

SIDE STAND FT35

Spindle- 404E & DS NO LONGER AVAILABLE>BUY S2-1253-RC

SWING ARM SPINDLE 404 NON GENUINE PART

CCM 404 replacement plated swing arm spindle manufactured for us locally by a precision engineer.

USED REAR SHOCK WP CCM 404 RRP £744.48 *SEE MORE BEFORE BUYING*

THIS SHOCK IS USED AS YOU CAN SEE AND APPEARS TO BE IN GOOD WORKING ORDER BUT WE CANNOT 100% GUARANTEE THIS.

THE DISTANCE FROM CENTRE TO CENTRE OF THE EYELETS IS 403MM SO PLEASE CHECK THIS BEFORE PURCHASING.