CCM 604 Rear Wheel & Brake Components


This compound is non sintered and not as hard as the "R" pad. It is suited for road or trail use.
This sintered compound is for off-road use and is suitable for both dry and muddy conditions.

Key features of SG are:

  • Excellent performance and stability throughout temperature range
  • Designed to perform well also with the presence of abrasive particles coming from muddy conditions
  • Outstanding pad life even in muddy conditions.
  • Suitable for stainless steel discs only
This pad has a sintered compound that is harder than th "TT" pad.  It is suited for road or wet & muddy Trail riding and Enduro.

Quality sintered off road brake pads manufactured in Czech Republic.

Double sealed bearing. 60042RS

  • R30 604/644 mag front wheel - 2x required
  • R30 604/644 mag rear wheel - 2x required
  • 604/644/404 AJP rear hub spoked - 2x required plus 1x 62042rs
  • 604/644/404 AJP fornt hub spoked - 2x required
  • GasGas TX125 Randonne Rear Wheel - 2x required
  • GasGas EC200,250,300 1997 - 2003 front wheel - 2x required
  • GasGas EC200,250,300 1997 on (all models) rear wheel disc side bearing
  • GasGas EC200,250,300,1997 on (all models) rear wheel sprocket side inner bearing
  • Casa front wheel bearings when using kit (FCBKSKFR) - 2x required


Sprocket side outer bearing for AJP rear hub and front wheel bearing for Talon hub (2 reqd)

Rear AJP hub also requires 2x60042rs

Fantic Casa Later models-rear wheel bearing LH side (2 required). Check your bearings first-USE IF YOUR BEARING OUTSIDE DIAMETER IS 47MM

GAS GAS EC REAR WHEEL TO 2002 sprocket side outer bearing.





Double sealed bearing.


  • CCM R30 604/644 mag rear wheel cush drive bearing - 2x required
  • CCM 604e up to 2000 Talon rear hub - 3x required
  • GasGas EC200,250,300 2003 on rear wheel sprocket side outer bearing - 1x required
  • KTM EXC 


Premium quality Continental inner tube to suit the following sizes:

  • 4.00-18
  • 4.25-18
  • 4.50-18
  • 4.60-18
  • 120/80-18
  • 120/90-18
  • 130/70-18
  • 130/80-18
  • 130/90-18
  • 140/70-18
  • 140/80-18
  • 150/70-18


Replacement 17" rim tape.
Replacement 18" rim tape.

6 x required

Genuine Brembo rear brake pad retaining plate set.

Replacement set of double sealed wheel bearings to suit models using the AJP hubs.

A set of machined alloy wheel spacers for 604 mag wheels. 
Non Genuine AJP Rear Hub Bearing Retaining Circlip for 604,644 and 404 models with AJP Hubs and Spokes also EC Gas Gas 2005 on

Replacement rear brake disc for all models excluding those with mag wheels fitted.

Replacement rear brake disc from Braking.  Note, you will need socket cap allen bolts to fit this item. This item will not fit mag wheels.

Aftermarket Rear Brake Master Cylinder Repair Kit to fit 604, 644, 404. Includes Circlip, Plunger with seals, Dust seal and nut.

Replacement rear wheel spindle.

17" rear spoke and nipple to suit all DS models using the Supermoto wheels.
Rear 18" spoke and nipple to suit all DS models using the off-road wheels.