ALSO FITS KTM EXC
Quality sintered off road brake pads manufactured in Czech Republic.

FITS...

CCM 604 644 404, Gas Gas EC125 EC200 EC250 EC300 from 1995 - 1999 & KTM EXC

Original Brembo front pad retaining pin.


Replacement pair of double sealed wheel bearings to suit models using the AJP hubs and MAG wheels.

Replacement brake disc to suit Supermoto spoked wheels only.

6X AF001 BOLTS REQD TO FIT. 


Genuine Brembo front brake pad retaining plate set.
6x AF001 disc bolts are required to fit this item.

6X AF001 BOLTS REQD TO FIT. 

260mm front brake disc for off-road wheels.


Genuine Brembo front brake master cylinder repair kit for all models using the 11mm bore size.
Replacement front brake lever adjuster.

CCM 

Sprocket side outer bearing for AJP rear hub and front wheel bearing for Talon hub (2 reqd)

Rear AJP hub also requires 2x60042rs

 

 

 

 


Front brake caliper bracket to suit WP forks.  For use when swapping to Supermoto wheels using the 320mm brake disc.

Front brake caliper bracket to suit WP forks.  For use when swapping to Trail wheels using the 260mm brake disc.


Brembo seal kit with silicon grease for CCM fornt calipers.
Front 21" spoke and nipple to suit all DS models using the off-road wheels.

6 x required

No longer available from CCM so we've had a batch made by a local precision engineer.
Replacement 17" speedo drive for models using the AJP wheels (2001 onwards).

Replacement 17" speedo drive for models using Talon wheels.
Replacement 21" speedo drive for models using the AJP wheels (2001 onwards).
Replacement 21" speedo drive for models using Talon wheels.

Replacement speedo drive for R30 models using the mag wheels.  This item has the reference number 750604 stamped in the body and was used on models up to October 2002.