CCM 644 Switches & Relays

 

  • Ignition, starter, indicator relays.
  • Factory and aftermarket replacement handlebar switches. 

 

This switch is suitable for the following Rotax models:

  • R30
  • RS
  • Supermoto
  • Trail

Genuine CCM part is no longer available, but this unit is made by original supplier used by CCM. Supplied with correct wiring and plug (grips not included).

This non genuine replacement Ignition Switch is identical to look at and fit except that there is no parking light position when the steering is locked.  Your position (side) lights will still work just the same in the "on" or "run" position.  Just plug into the loom with the block connector attached.

This non genuine replacement Ignition Switch is identical to look at and fit except that there is no parking light position when the steering is locked.  Your position (side) lights will still work just the same in the "on" or "run" position.  Just plug into the loom with the block connector attached.

Replacement ignition switch for models 2001-2003.

Replacement indicator relay for use on all models.  Please note that this item needs to be connected in the following way:

  • Red wire - connect to X
  • Orange wire - connect to L
  • Black wire - does not connect to anything (isolate and move out of the way)
Instructions are printed on the side of the relay.

Japanese manufactured item that fits all models.  Sealed around contacts for better resistance against moisture. It is also used for the R30 headlight relay. 
THIS SOLENOID MAY NEED THE CONNECTIONS CHANGING TO IT YOUR BIKE BUT WORKS ON ALL BIKES THE SAME WAY
Replacement hydraulic rear stop light switch to suit all models.