CCM 644 Levers & Clamps

 

  • Fast moving spares.
 

 

This lever is a lower cost replacement for the original adjustable clutch lever, but still matches the front brake lever. It fits the original clamp and sits in the same position as the adjustable lever did set at position 1 (furthest from handlebar) for maximum clutch pull. There is no adjuster on this lever.
If you have a 644 or 604 from 2001 on and need just the blade part of the lever assembly, you can detach your broken or bent blade where it fits the other section of the lever, by removing the circlip and pin.  This is a lower cost way of replacing your lever and keeping the adjuster providing your fitting between the lever and clamp is not damaged.
Replacement adjustable clutch lever.  This item fits all 644 models and 604 models 2001 onwards.

Replacement front brake lever blade.
Replacement choke lever.  This is actually a Yamaha part but is the same fitment.
Complete L/H lever and clamp assembly. 

Replacement alloy clutch lever/cable adjuster.
Replacement L/H lever clamp incorporating mirror boss.
Replacement front brake lever/mirror clamp for all models.

Genuine Brembo front brake master cylinder repair kit for models using the 11mm bore size.
Replacement Brembo front brake lever shroud.
Replacement front brake lever adjuster.

Replacement set of WP handlebar clamps.

Replacement lower handlebar clamp for WP forks.

Replacement WP upper handlebar clamp.


Replacement WP M8x30 top clamp bolt.
This riser kit will raise the bars by 25mm.