2017+ Fantic 250E Casa 4T Rear Wheel & Brake

  • Please browse sections below.

CCM 

Sprocket side outer bearing for AJP rear hub and front wheel bearing for Talon hub (2 reqd)

Rear AJP hub also requires 2x60042rs

Fantic Casa Later models-rear wheel bearing LH side (2 required). Check your bearings first-USE IF YOUR BEARING OUTSIDE DIAMETER IS 47MM

 

 

 

 

Premium quality Continental inner tube to suit the following sizes:

  • 4.00-18
  • 4.25-18
  • 4.50-18
  • 4.60-18
  • 120/80-18
  • 120/90-18
  • 130/70-18
  • 130/80-18
  • 130/90-18
  • 140/70-18
  • 140/80-18
  • 150/70-18

 

Replacement 18" rim tape.

This kit will fit the later carb models only. EFI models already have sealed hubs. If your original bearings are 47mm outside diameter, this kit will fit.


Set of trail wheels assembled by us to fit the Fantic Casa 250 (carb models and EFI) these will fit competition models also. The rear hub is AJP as used by CCM with the front hub and both rims being sourced from a CCM CXR230. We have added security bolts to the rims and fitted Gibson FIM approved road legal tyres. As you can see they are complete wheels with discs, bearings, seals, sprocket, etc. Speedo magnet included but not needed for EFI. The wheel spacers included have been made to suit the Fantic Casa so the only tweaking that may be needed is with the chain adjusters to ensure the sprockets are in-line. They are unused but we have test fitted them in a brand new bike to ensure correct fitment so this is evident (grease).


USE IF YOUR BEARING OUTSIDE DIAMETER IS 37MM

USE IF YOUR BEARING OUTSIDE DIAMETER IS 47MM