2009 Gas Gas EC Engine Spares

 

 

 

 

to 2011
to 2011

Wossner Quality replacement "B" Piston Kit to fit GasGas EC / CC 200 from '03 - Present.
TO FIT GASGAS EC250 1997 ON
Wossner Quality replacement "B" Piston Kit to fit GasGas EC / CC 250 from '97 - Present.

Genuine GasGas original exhaust header o ring (2 required)

Viton exhaust O ring
ONLY FITS WOSSNER PISTON

ONLY FITS WOSSNER PISTON
ONLY FITS WOSSNER PISTON


Small End Bearing to fit CC/EC 200/250/300 from '00 to Present.














Genuine Gas Gas uprated better quality and harder wearing kickstart fitted from 2012, but also fits earlier EC models. The top of the pivot shaft is no longer open, so it can't allow dirt into it as easily.




THIS PART NEEDS THE ORIGINAL CLUTCH BASKET RIVETS DRILLING OUT TO FIT. ALSO THERE ARE 40MM AND 46MM CENTRES TO CLUTCH BASKETS THROUGHOUT THE YEARS SO YOU NEED TO CHECK YOUR BASKET CENTRE WITH THE PRIMARY GEAR REMOVED BEFORE ORDERING.

 TALON CLUTCH BASKETS ARE MACHINED FROM A SINGLE AIRCRAFT SPEC 7075 T6 ALLOY BILLET.

 

 


 THIS PART NEEDS THE ORIGINAL CLUTCH BASKET RIVETS DRILLING OUT TO FIT. ALSO THERE ARE 40MM AND 46MM CENTRES TO CLUTCH BASKETS THROUGHOUT THE YEARS SO YOU NEED TO CHECK YOUR BASKET CENTRE WITH THE PRIMARY GEAR REMOVED BEFORE ORDERING.

TALON CLUTCH BASKETS ARE MACHINED FROM A SINGLE AIRCRAFT SPEC 7075 T6 ALLOY BILLET.







THIS KICKSTART IS A SNUG FIT SO YOU MUST MAKE SURE SPLINES ARE LINED UP WITH THE KICKSTART SHAFT AND GENTLY TAP ON WITH A HAMMER AND PIECE OF WOOD. PUT THE BOLT IN WHEN ABLE TO AND TIGHTEN TO PULL THE KICKSTART ON THE REST OF THE WAY.