2011 Gas Gas EC Accessories

 

 

  • A selection of trick bits and parts that to suit your model.
 

 



Acerbis Rally 3 handguards including fitting kit.

Quick and easy to mount. Includes all fittings.
Quick and easy to mount. Includes all fittings.
Quick and easy to mount. Includes all fittings.



SEALED SWITCH UNIQUE TO HAINES & CO. FITS STRAIGHT INTO IGNITION SWITCH HOLE AND PLUGS INTO ORIGINAL BLOCK CONNECTOR.

For use when washing your enduro or motorcross bike.
Saves undoing the screws on the top of the forks to release air pressure build up.

An alternative to the fuel cap breather pipe. 

Please specify colour on order.

Replacement 12L fuel tank to suit 2000-2006 models. However,  you can fit this tank to models up to 2011 using a few diferent fittings.

The photo shows this tank fitted to a 2011 EC250. 


This air filter cover is a must for washing the inside of the airbox whilst washing the bike. Simply remove the air filter, fit the cover and wash away!  This new version fits and seals even better with a stepped lip that prevents it slipping out of place when fitted.
These Gas Gas spacers can be used to raise your handlebars by 3.5mm at a time.  There is enough thread on EC clamps to take a total of 3 per side (some bikes already have 1 or 2 fitted).

The Gas Gas EC range FMF Gnarly front pipe focuses on increasing the lower RPM horsepower and torque to help you get out of the toughest terrain.

It is Nickel plated and constructed from super-strong 18 guage steel.

 

Replacement gear lever for all EC 2-stroke models from 1998 on 2t

EC LOWERING LINKS To fit EC200/250/300 2000-2011 and ECF250/ECF300 2010-2013 CAMI 2014 ON

Approx 23mm seat height reduction. 




Quality Sump Guard to fit EC/CC Gasgas 2010/2011.  Brackets supplied mount to frame at front and guard locates to frame undeneath at back.  Protects sump, generator and water pump.

This kit is supplied in a nylon bag that is ideal to keep with the bike until you need it.  The kit includes the following:

 

  • 1.63m inner cable to suit throttle cables
  • 1.63mm inner cable to suit clutch cables
  • Solderless nipples
  • Special aluminium trumpet nipples 
  • Various fittings as shown in photo
Remember, replace the cable with an original fitment item as soon as you can!