2011 Gas Gas EC Lighting and Electrical

 

 


2017 LIGHT SWITCH DOES NOT HAVE SIDE LIGHT SWITCH SEE PICTURES

These parts can be fitted to an original Gas Gas bendix provided your shaft and fine tooth gear that works against the starter are o.k. You need to release the "c" clip on the shaft to allow the old components to slide off, then replace with the new parts. 

SEALED SWITCH UNIQUE TO HAINES & CO. FITS STRAIGHT INTO IGNITION SWITCH HOLE AND PLUGS INTO ORIGINAL BLOCK CONNECTOR.
This Genuine Gas Gas part is bolted to the front hub and is recognised by the sensor on the speedo cable for eletronic speedometers.




MUST NOT BE CHARGED WITH OPTIMATE OR SIMILAR MAINTENANCE FREE TYPE CHARGERS



This is a direct replacement for the Gas Gas original, but more reliable. It mounts to the original holes and plugs straight in.