2012 Gas Gas EC Lighting and Electrical

 

 


2017 LIGHT SWITCH DOES NOT HAVE SIDE LIGHT SWITCH SEE PICTURES

Yuasa / Varta Quality Sealed Battery
These parts can be fitted to an original Gas Gas bendix provided your shaft and fine tooth gear that works against the starter are o.k. You need to release the "c" clip on the shaft to allow the old components to slide off, then replace with the new parts. 


SEALED SWITCH UNIQUE TO HAINES & CO. FITS STRAIGHT INTO IGNITION SWITCH HOLE AND PLUGS INTO ORIGINAL BLOCK CONNECTOR.
This Genuine Gas Gas part is bolted to the front hub and is recognised by the sensor on the speedo cable for eletronic speedometers.





Starter button can be mounted on L/H or R/H bar. COMPETITION USE ONLY. WIRING THERE FOR EXTRA HORN BUTTON IF REQUIRED (order SW1041A).
MUST NOT BE CHARGED WITH OPTIMATE OR SIMILAR MAINTENANCE FREE TYPE CHARGERS




2018 MODEL...

THIS EARTH CABLE CONNECTS FROM THE BATTERY STRAIGHT TO THE STARTER SO THE BIKE IS ABLE TO START BETTER! PLEASE SEE THE SECOND IMAGE FOR MOUNTING POINT (FIXINGS NECESSARY INCLUDED). THIS WAS INCLUDED ON ALL OTHER E START MODELS BUT REMOVED FROM 2018'S UNNECESSARILY.

ALL OTHER E-START MODELS

REPLACEMENT EARTH CABLE TO CONNECT THE BATTERY TO THE STARTER.

PLEASE NOTE ONE END HAS A 5MM HOLE FOR BATTERY SIDE AND THE OTHER HAS A 6MM HOLE FOR THE STARTER SIDE. 



This is a direct replacement for the Gas Gas original, but more reliable. It mounts to the original holes and plugs straight in.