2014 Gas Gas EC 2 Stroke Engine Spares

 

 

Wossner Quality replacement "B" Piston Kit to fit GasGas EC / CC 200 from '03 - Present.
TO FIT GASGAS EC250 1997 ON

Wossner Quality replacement "B" Piston Kit to fit GasGas EC / CC 250 from '97 - Present.



Small End Bearing to fit CC/EC 200/250/300 from '00 to Present.












Genuine Gas Gas uprated better quality and harder wearing kickstart fitted from 2012, but also fits earlier EC models. The top of the pivot shaft is no longer open, so it can't allow dirt into it as easily.


These parts can be fitted to an original Gas Gas bendix provided your shaft and fine tooth gear that works against the starter are o.k. You need to release the "c" clip on the shaft to allow the old components to slide off, then replace with the new parts. 

Fits 2t EC front sprocket cover.

THIS PART NEEDS THE ORIGINAL CLUTCH BASKET RIVETS DRILLING OUT TO FIT. ALSO THERE ARE 40MM AND 46MM CENTRES TO CLUTCH BASKETS THROUGHOUT THE YEARS SO YOU NEED TO CHECK YOUR BASKET CENTRE WITH THE PRIMARY GEAR REMOVED BEFORE ORDERING.

 TALON CLUTCH BASKETS ARE MACHINED FROM A SINGLE AIRCRAFT SPEC 7075 T6 ALLOY BILLET.

 

 


 THIS PART NEEDS THE ORIGINAL CLUTCH BASKET RIVETS DRILLING OUT TO FIT. ALSO THERE ARE 40MM AND 46MM CENTRES TO CLUTCH BASKETS THROUGHOUT THE YEARS SO YOU NEED TO CHECK YOUR BASKET CENTRE WITH THE PRIMARY GEAR REMOVED BEFORE ORDERING.

TALON CLUTCH BASKETS ARE MACHINED FROM A SINGLE AIRCRAFT SPEC 7075 T6 ALLOY BILLET.






Includes base gskt, head o rings, left and right power valve cover gaskets and ex gasket.
Includes base gskt, head o rings, left and right power valve cover gaskets and ex gasket.