2014 Gas Gas EC Lighting and Electrical

 

 


Yuasa / Varta Quality Sealed Battery
These parts can be fitted to an original Gas Gas bendix provided your shaft and fine tooth gear that works against the starter are o.k. You need to release the "c" clip on the shaft to allow the old components to slide off, then replace with the new parts. 

SEALED SWITCH UNIQUE TO HAINES & CO. FITS STRAIGHT INTO IGNITION SWITCH HOLE AND PLUGS INTO ORIGINAL BLOCK CONNECTOR.




Starter button can be mounted on L/H or R/H bar. COMPETITION USE ONLY. WIRING THERE FOR EXTRA HORN BUTTON IF REQUIRED (order SW1041A).

MUST NOT BE CHARGED WITH OPTIMATE OR SIMILAR MAINTENANCE FREE TYPE CHARGERS





This is a direct replacement for the Gas Gas original, but more reliable. It mounts to the original holes and plugs straight in.