2015 Gas Gas EC Accessories

 

 

  • A selection of trick bits and parts that to suit your model.
 


Quick and easy to mount. Includes all fittings.



SEALED SWITCH UNIQUE TO HAINES & CO. FITS STRAIGHT INTO IGNITION SWITCH HOLE AND PLUGS INTO ORIGINAL BLOCK CONNECTOR.

Saves undoing the screws on the top of the forks to release air pressure build up.

Genuine GasGas Frame guards with ties for 2012, 2013, 2014 EC250 and EC300.

An alternative to the fuel cap breather pipe. 

Please specify colour on order.


This air filter cover is a must for washing the inside of the airbox whilst washing the bike. Simply remove the air filter, fit the cover and wash away!  This new version fits and seals even better with a stepped lip that prevents it slipping out of place when fitted.
These Gas Gas spacers can be used to raise your handlebars by 3.5mm at a time.  There is enough thread on EC clamps to take a total of 3 per side (some bikes already have 1 or 2 fitted).
Replacement gear lever for all EC 2-stroke models from 1998 on 2t


Starter button can be mounted on L/H or R/H bar. COMPETITION USE ONLY. WIRING THERE FOR EXTRA HORN BUTTON IF REQUIRED (order SW1041A).


TAKEN FROM A 2017 EC RACING NOT BEEN USED

This kit is supplied in a nylon bag that is ideal to keep with the bike until you need it.  The kit includes the following:

 

  • 1.63m inner cable to suit throttle cables
  • 1.63mm inner cable to suit clutch cables
  • Solderless nipples
  • Special aluminium trumpet nipples 
  • Various fittings as shown in photo
Remember, replace the cable with an original fitment item as soon as you can!