2015 Gas Gas EC Lighting and Electrical

Hour Recording Meter - Ideal for monitoring maintenance on off road bikes

GAS GAS EC SPEEDO CABLE/SENSOR 2006 ON

12V 35/35 P43T HALOGEN

12V BUDGET HORN

2017 GG LIGHT SWITCH-LIGHTS ON ALWAYS FITS CAMI AND EC FROM 2010

click to enlage 2017 GG LIGHT SWITCH-LIGHTS ON ALWAYS FITS CAMI AND EC FROM 2010 image 2

2017 LIGHT SWITCH DOES NOT HAVE SIDE LIGHT SWITCH SEE PICTURES

4 WAY CLIP FOR CLUTCH HOSE/STATOR/STARTER LEADS

7MM H.T.LEAD CONNECTOR

BATTERY CHARGER OPTIMATE 1 DUO (STD BATTERY OR LITHIUM)

BATTERY FOR E/START MODELS ONLY

Yuasa / Varta Quality Sealed Battery

BATTERY INSULATION RUBBER 14-17

CDI UNIT EC250,300 2T E/START 2015 ON

CTEK BATTERY CHARGER XS0.8

DL/CR2032 GG SPEEDO BATTERY

EC250, EC300 IGNITION FLICK SWITCH 2T E/START SEALED - REPLACES KEY SWITCH

click to enlage EC250, EC300 IGNITION FLICK SWITCH 2T E/START SEALED - REPLACES KEY SWITCH image 2

SEALED SWITCH UNIQUE TO HAINES & CO. FITS STRAIGHT INTO IGNITION SWITCH HOLE AND PLUGS INTO ORIGINAL BLOCK CONNECTOR.

Gas Gas EC Front Wheel Speedo Magnet.

This Genuine Gas Gas part is bolted to the front hub and is recognised by the sensor on the speedo cable for eletronic speedometers.

HEADLAMP SURROUND ONLY - 2012 ON AND CAMI WHITE

HEADLAMP UNIT (NO SURROUND) EC 2011 ON WHITE

HEADLIGHT SURROUND RED FITS 2012 TO 2017

HORN OR KILL SWITCH WITH BULLET CONNECTORS-non genuine

HT LEAD 7MM X 1MTR

IGNITION COIL EC250 EC300 2014 ON

IGNITION FLYWEEL E/START / STD 2014 ON

IGNITION SWITCH 14-17

INDICATOR L/H FRONT 06-17

INDICATOR L/H REAR 06-17 COMES WITH NUT AND BOLT

INDICATOR R/H FRONT 06-17

INDICATOR R/H REAR 06-17 COMES WITH NUT AND BOLT

L/H FRONT INDICATOR HOLDER DOESN'T INCLUDE SCREW 06-17

L/H SWITCH ASSY EC E/START / CAMI 2014 ON NO LONGER AVAILABLE! ORDER EE60200GG-EKK-1

L/H SWITCH WITH SEPARATE STARTER BUTTON-JUST PLUG IN. ONLY 19MM WIDE.NO INDICATOR- Wired and ready to plug straight in.

click to enlage L/H SWITCH WITH SEPARATE STARTER BUTTON-JUST PLUG IN. ONLY 19MM WIDE.NO INDICATOR- Wired and ready to plug straight in. image 2

Starter button can be mounted on L/H or R/H bar. COMPETITION USE ONLY. WIRING THERE FOR EXTRA HORN BUTTON IF REQUIRED (order SW1041A).

LI-ION BATTERY ULTRA LIGHTWEIGHT BATTERY FOR E/START EC MODELS

MUST NOT BE CHARGED WITH OPTIMATE OR SIMILAR MAINTENANCE FREE TYPE CHARGERS

LIGHTING SWITCH EC 2014 ON NON ELECTRIC START

LOWER BATTERY BOX 2014-17

NEGATIVE BATTERY CABLE 12-17

NUMBER PLATE LIGHT 2012 ON

R/H FRONT INDICATOR HOLDER DOESN'T INCLUDE SCREW 06-17

REGULATOR EC ELECTRIC & NON ELECTRIC START 2014 ON

REGULATOR RECTIFIER SUPPORT EC 2T 2014 ON

SPEEDO CABLE CLIP

SPEEDO ONLY SUPPORT NO IGNITION SWITCH SLOT 2014 ON

SPEEDO UNIT 2014 ON

STARTER EARTH CABLE '18 EC AND REPLACEMENT FOR ALL OTHER E/START EC'S *SEE MORE*

click to enlage STARTER EARTH CABLE '18 EC AND REPLACEMENT FOR ALL OTHER E/START EC'S *SEE MORE* image 2

2018 MODEL...

THIS EARTH CABLE CONNECTS FROM THE BATTERY STRAIGHT TO THE STARTER SO THE BIKE IS ABLE TO START BETTER! PLEASE SEE THE SECOND IMAGE FOR MOUNTING POINT (FIXINGS NECESSARY INCLUDED). THIS WAS INCLUDED ON ALL OTHER E START MODELS BUT REMOVED FROM 2018'S UNNECESSARILY.

ALL OTHER E-START MODELS

REPLACEMENT EARTH CABLE TO CONNECT THE BATTERY TO THE STARTER.

PLEASE NOTE ONE END HAS A 5MM HOLE FOR BATTERY SIDE AND THE OTHER HAS A 6MM HOLE FOR THE STARTER SIDE.

STARTER MOTOR EC 2015 ON

STARTER RELAY (SOLENOID) NON GENUINE

STARTER RELAY RUBBER SUPPORT 2014 ON

STARTER RELAY TO STARTER CABLE 12-17

Stop LIGHT Switch Gas Gas EC

STRAP HEADLIGHT (EACH)

SUPPORT BRACKET FOR SPEEDO / IGNITION SWITCH

Tail Light LED Gas Gas EC 2008 on

TAIL LIGHT LED GAS GAS EC 2008 ON (NON GENUINE) SEE

This is a direct replacement for the Gas Gas original, but more reliable. It mounts to the original holes and plugs straight in.