2018 Gas Gas EC Accessories

 

 


Quick and easy to mount. Includes all fittings.








Simply push into the end of your spindle and tighten the allen bolt up from the inside. The puller helps to reduce the time spent messing around trying to get the wheel spindle out. All that is needed is a little pull and twist!


These Gas Gas spacers can be used to raise your handlebars by 3.5mm at a time.  There is enough thread on EC clamps to take a total of 3 per side (some bikes already have 1 or 2 fitted).
Set of enduro/trail wheels assembled by us to fit Gas Gas EC's 2018+. Rims are sourced from a CCM CXR230 and the wheels include wavy discs, alloy sprocket, bearings, seals, heavy duty tubes, security bolts and CST FIM approved road legal tyres. Speedo magnet included. The necessary wheel spacers needed are included but you will need to use some of the originals. They are unused but we have test fitted them in a bike to ensure correct fitment so this may be evident (grease).









FRONT PIPE NEEDS REMOVING IN ORDER TO FIT ON THE 2020 ECRANGER

This kit is supplied in a nylon bag that is ideal to keep with the bike until you need it.  The kit includes the following:

 

  • 1.63m inner cable to suit throttle cables
  • 1.63mm inner cable to suit clutch cables
  • Solderless nipples
  • Special aluminium trumpet nipples 
  • Various fittings as shown in photo
Remember, replace the cable with an original fitment item as soon as you can!