2019 Gas Gas Handlebars, Controls, Levers, Cables


Page Break

Genuine GasGas Throttle Cable

A highly developed grip glue for securing all types of handlebar grips.

Genuine Gas Gas uprated better quality and harder wearing kickstart fitted from 2012, but also fits earlier EC models. The top of the pivot shaft is no longer open, so it can't allow dirt into it as easily.
Quick and easy to mount. Includes all fittings.

A quality clutch lever that is considerably less than the original Gas Gas item.

These Gas Gas spacers can be used to raise your handlebars by 3.5mm at a time.  There is enough thread on EC clamps to take a total of 3 per side (some bikes already have 1 or 2 fitted).

This Genuine Gas Gas part is bolted to the front hub and is recognised by the sensor on the speedo cable for eletronic speedometers.
Replacement gear lever for all EC 2-stroke models from 1998 on 2t

Renthal motocross/enduro grip with full waffle design.  Medium compound. 



Rethal kevlar dual layer grips with the diamond/waffle pattern. 

Please note, these grips require gluing.

This kit is supplied in a nylon bag that is ideal to keep with the bike until you need it.  The kit includes the following:


  • 1.63m inner cable to suit throttle cables
  • 1.63mm inner cable to suit clutch cables
  • Solderless nipples
  • Special aluminium trumpet nipples 
  • Various fittings as shown in photo
Remember, replace the cable with an original fitment item as soon as you can!