Pre 2007 Gas Gas Front Wheel & Brake

  • Please browse sections below.

EBC Front pads to fit All GasGas EC from 2000 on.

The TT-Series pads have a carbon graphite formula. The main advantage of this compound is the lack of heat generated or conduction under braking. This means it keeps both the brake rotor and caliper cool, allowing better braking performance for longer. The TT-Series works best in fast and dry riding conditions.

The material is also very usable for standard sport ATV usage. Also TUV tested and KBA approved for street use on enduro bikes.

The TT series or X pads do not last as long as a sintered pad but are a strong favourite amongst Enduro riders due to their low heat transfer.

Moto Cross / Enduro pads with pin included.
Quality sintered off road brake pads manufactured in Czech Republic.

Double sealed bearing. 60042RS

  • R30 604/644 mag front wheel - 2x required
  • R30 604/644 mag rear wheel - 2x required
  • 604/644/404 AJP rear hub spoked - 2x required plus 1x 62042rs
  • 604/644/404 AJP fornt hub spoked - 2x required
  • GasGas TX125 Randonne Rear Wheel - 2x required
  • GasGas EC200,250,300 1997 - 2003 front wheel - 2x required
  • GasGas EC200,250,300 1997 on (all models) rear wheel disc side bearing
  • GasGas EC200,250,300,1997 on (all models) rear wheel sprocket side inner bearing
  • Casa front wheel bearings when using kit (FCBKSKFR) - 2x required

Premium quality inner tube to suit the following sizes:

  • 300-21
  • 80/100-21
  • 100/90-21
  • 90/90-21
  • 90/100-21


Replacement 21" rim tape.



Simply push into the end of your spindle and tighten the allen bolt up from the inside. The puller helps to reduce the time spent messing around trying to get the wheel spindle out. All that is needed is a little pull and twist!

This Genuine Gas Gas part is bolted to the front hub and is recognised by the sensor on the speedo cable for eletronic speedometers.